C-Link Protocol Commands
Measurement Configuration
Thermo Electron Corporation
Model 42
i
Low Source Instruction Manual
B-31
gas unit
This command reports the current gas units (ppb, ppm,
µ
g/m
3
, or mg/m
3
).
The example reports that the gas unit is set to ppb.
Send:
gas unit
Receive:
gas unit ppb
set gas
unit
unit
= | ppb | ppm |
µ
g/m
3
| mg/m
3
|
This command sets the gas units to ppb, ppm,
µ
g/m
3
, or mg/m
3
. The
example below sets the gas units to mg/m
3
.
Send:
set gas unit mg/m3
Receive:
set gas unit mg/m3 ok
meas mode
This command reports which measurement mode (NO/NO
x
, NO, NO
x
) is
active. The example below reports that the measurement mode is set to NO.
Send:
meas mode
Receive:
meas mode no
set meas mode
mode
mode
= | no/nox | no | nox |
This command sets the instrument to NO/NO
x
(auto) mode, manual NO
mode, or manual NO
x
mode. The example below sets the instrument to the
manual NO mode.
Send:
set meas mode no
Receive:
set meas mode no ok
pres comp
This command reports whether pressure compensation is on or off. The
example below shows that pressure compensation is on.
Send:
pres comp
Receive:
pres comp on
set pres comp
onoff
These commands turn the pressure compensation
on
or
off
. The example
below turns pressure compensation off.
Send:
set pres comp off
Receive:
set pres comp off ok
Summary of Contents for 42i
