Thermo Scientific Orion 2111LL User Manual Download Page 106

Page: 106 / 118

VII-5

Customer Service

Thermo Scientific Orion 2111LL Sodium Monitor User Guide

ROSS and the COIL tradedress are trademarks of Thermo Fisher Scientific Inc. US Patent 6,793,787

Orion .Online .monitoring .products .are .warranted .to .be .free .from .defects .

in .material .and .workmanship .for .a .period .of .12 .months .from .date .of .

installation .or .18 .months .from .date .of .shipment, .whichever .is .earlier, .

when .used .under .normal .operating .conditions .and .in .accordance .with .the .

operating .limitations .and .maintenance .procedures .given .in .the .instruction .

manual, .and .when .not .having .been .subjected .to .accident, .alteration, .

misuse, .or .abuse . . .This .warranty .is .also .conditioned .upon .expendable .and .

consumable .items .(diffusion .tubing, .electrodes, .and .all .solutions) .being .

stored .at .temperatures .between .5 .°C .and .45 .°C .(40 .°F .and .110 .°F) .in .a .

non-corrosive .atmosphere .and .within .the .shelf .life .printed .on .the .product .

In .the .event .of .failure .within .the .warranty .period, .manufacturer, .or .its .

authorized .dealer, .will, .at .the .option .of .manufacturer, .repair .or .replace .the .

product .nonconforming .to .the .above .warranty, .or .will .refund .the .purchase .

price .of .the .unit .

The .warranty .described .is .exclusive .and .in .lieu .of .all .other .warranties .

whether .statutory, .express, .or .implied .including, .but .not .limited .to, .any .

implied .warranty .of .merchantability .or .fitness .for .a .particular .purpose .and .

all .warranties .arising .from .the .course .of .dealing .or .usage .of .trade . . .The .

buyer’s .sole .and .exclusive .remedy .is .for .repair .or .replacement .of .the .non-

conforming .part .thereof, .or .refund .of .the .purchase .price, .but .in .no .event .

shall .manufacturer .(its .contractors .and .suppliers .of .any .tier) .be .liable .to .the .

buyer .or .any .person .for .any .special .indirect, .incidental, .or .consequential .

damages .whether .the .claims .are .used .in .contract, .in .tort .(including .

negligence), .or .otherwise .with .respect .to .or .arising .out .of .the .product .

furnished .hereunder .

Online .products .used .at .overseas .nuclear .facilities .are .also .subject .to .

manufacturer’s .nuclear .terms .and .conditions . .Contact .manufacturer .if .you .

do .not .have .a .copy .

Representations .and .warranties .made .by .any .person, .including .its .

authorized .dealers, .distributors, .representatives, .and .employees .of .

manufacturer, .which .are .inconsistent .or .in .addition .to .the .terms .of .this .

warranty .shall .not .be .binding .upon .manufacturer .unless .in .writing .and .

signed .by .one .of .its .officers .

Warranty

上海肯强贸易有限公司
http://www.kq17.com.cn

Summary of Contents for Orion 2111LL























































































































Search results

Summary of Contents for Orion 2111LL

Reviews:

Thermo Scientific Orion 2111LL, User Manual, Page: 106 / 118

Search results

Summary of Contents for Orion 2111LL

Reviews: