Thermo Scientific GENESYS 10S Vis, User Manual

Page: 125 / 134

Thermo Scientific GENESYS 10S Vis User Guide 117
23
Parameters
Parameter Description
+ - x
÷
Enters math operators when in Calculator mode
(Utility)
% Formamide Enters percentage of formamide contained in the sample
(Oligos tests)
% GC Calculates percentage of GC pairs contained in the sample
(Oligos tests)
%Mismatch Enters the Mismatch value to calculate Tm
(Oligos tests)
% of lamp life used Displays the estimated percentage of lamp life used (based on a
typical lamp life of five years)
(Utility)
3-Pt Net Lets you calculate peak height from the tangential baseline in
the graph
(Scanning)
Absorbance Enters the absorbance value
Accept Name Accepts the displayed Name entry
(Test Name and Edit [Units])
Add Character Adds a highlighted character to the Name entry
(Test Name and Edit [Units])
Add nm Lets you add a wavelength and factor to the list in
Multiwavelength tests and some Performance Verification tests
Area Lets you calculate area under the peak in the graph
(Scanning)
AutoPrint Turns the automatic printout on or off
Autoscale Rescales the graph to the original ranges of the X- and Y-axes
(Kinetics, Scanning)
Base Sequence Sequence of bases contained in the sample
(Oligos – calc factor tests)