Thermo Scientific GENESYS 10S Vis, User Manual

Page: 65 / 134

Thermo Scientific GENESYS 10S Vis User Guide 57
14
Scanning
The wavelength scanning application lets you measure the absorption or percent transmission
spectrum of a sample. You can use scans to determine peak wavelengths or to evaluate the
quality of a material.
Use the Scanning application for:
• Recalling a Test
• Setting Up Test Parameters
• Cell Correction
• Collecting a Baseline Scan
• Scanning a Sample
• Viewing and Manipulating Scan Data
• Rescaling Graphical Scan Data
• Determining Peak Height Using a 3-point Net Equation
• Calculating the Area Under a Curve
• Labeling Peaks and Valleys
To get started, press Test , highlight Scanning and press Enter .
Recalling a Test
Y To recall a test
1. Press Stored Tests .
2. Highlight the test you want to recall and press Enter .
Note The Scanning application lets you measure only one sample at a time. Auto 6, Auto
3 and Manual 6 are not available for scanned measurements.
Note To set a baseline expiration time, press Utility and then highlight Baseline
Expiration . Press Enter and set the desired time.