![background image](http://html.mh-extra.com/html/thermo-king/precedent-s-600/precedent-s-600_operators-manual_1104331090.webp)
Operating Instructions
87
Flash Drive
If a properly configured USB Flash Drive is currently
connected to the USB Port on the unit Control Panel, the Flash
Drive Menu will appear as a Main Menu selection. If a
properly configured USB Flash Drive is connected to the USB
Flash Drive connector, this feature allows the operator to select
the desired Flash Drive function. If enabled when the Flash
Drive was configured, the following functions may be
available:
Download
•
Download the ServiceWatch Data Logger
•
Download the CargoWatch Data Logger
Flashload
•
Flash load Base Controller Software
•
Flash load HMI Control Panel Software
OptiSet Plus
•
SEND
•
Send OptiSet Plus files
•
RETRIEVE
•
Retrieve OptiSet Plus files
If a USB Flash Drive is not connected to the unit, this feature
will not appear in the Main Menu.
Flash Drive Icon
•“
The USB Icon (Figure 88) will appear in the
upper left corner of the display as shown below
when a USB Flash Drive is inserted into the
Flash Flash Drive Only USB Port on the Unit
Control Panel.
•“The USB Icon will also appear if a computer
is connected to the PC Only USB Port on the
Unit Control Panel or inside the control box.
Figure 88: Flash Drive Icon
ON
OFF
MENU
35
°F
35
SET
SENSORS
GAUGES
POINT
.8
Summary of Contents for Precedent S-600
