Thermo King Precedent S-600, Operator'S Manual

Page: 87 / 221

Operating Instructions
84
The Main Menu will appear. Press the UP or DOWN Key as
required to choose the Pretrip Menu. When the Pretrip Menu is
shown press the SELECT Key to start a Pretrip Test (Figure
81).
Figure 81: Select Key
The display will briefly show PROGRAMMING PRETRIP
MODE (Figure 82). If the unit is not running a Full Pretrip Test
will be initiated. If the unit is running in either diesel or electric
mode a Running Pretrip Test will be performed.
Figure 82: Programming Trip Mode
If all alarms were not cleared a prompt appears (Figure 83).
Exit the Pretrip Test, clear all alarms and repeat the Pretrip
Test.
Figure 83: Alarms Not Cleared
ON
OFF
MAIN MENU
DOWN EXIT SELECT UP
PRETRIP
LANGUAGE
ALARMS
GAUGES
ON
OFF
PROGRAMMING PRETRIP MODE
NO PRETRIP -- ALARM ACTIVE
EXIT
ON
OFF