![background image](http://html.mh-extra.com/html/thermo-king/precedent-s-600/precedent-s-600_operators-manual_1104331167.webp)
Alarm Codes
164
144
Lost Expansion Module CAN
Communication
If unit is shut down repair immediately. Otherwise, report
alarm at end of the day.
X
145
Loss of Controller “On” Feedback
Signal
If unit is shut down repair immediately. Otherwise, report
alarm at end of the day.
X
146 Software Version Mismatch
If unit is shut down repair immediately. Otherwise, report
alarm at end of the day.
X
148
Autoswitch Electric to Diesel
Disabled
Report alarm at end of the day.
X
150
CargoWatch Sensor Out of
Range Low
Manually monitor load temperature. Report alarm at end of
the day.
X
151
CargoWatch Sensor Out of
Range High
Manually monitor load temperature. Report alarm at end of
the day.
X
152 CargoWatch Sensor Failed
Manually monitor load temperature.Report alarm at end of
day.
X
Table of Alarm Codes
NOTE: Not all alarm codes are available with all microprocessor controllers or all revisions of software.
Code Description
Corrective Action
Level Of
Action
Ok T
o
Run
Check
Shut
Down
Summary of Contents for Precedent S-600
