Thermo King Precedent S-600, Operator'S Manual

Page: 70 / 221

Operating Instructions
67
Starting the Electric Motor
Units equipped with the SmartPower TM option only.
Electric Power Receptacle: The electric power receptacle
is used to connect the unit to an appropriate electric power
source for electric standby operation (Figure 57). The electric
power receptacle is usually mounted on the trailer below the
HMI Control Panel. Make sure the unit and the power supply
are turned off before connecting or disconnecting a power
cord.
Electric motor starting is automatic in both Continuous Mode
and Cycle Sentry Mode. The motor will start as required when
the unit is turned on. If any keys are being pressed on the HMI
Control Panel prior to the motor start, the motor start will be
delayed until 10 seconds after the last key is pressed.
CAUTION: The motor may start automatically any time the
unit is turned on.
Figure 57: Electric Power Receptacle
When the motor is preparing to start the HMI Control Panel
will display the motor start screen (Figure 58). The preheat
buzzer sounds for 20 seconds before the electric motor starts.
Figure 58: Motor Start Screen
ELECTRIC MOTOR STARTING ON
OFF