Thermo King Precedent S-600, Operator'S Manual

Page: 60 / 221

Operating Instructions
57
Both Numerical Setpoints and Named
Products
OptiSet Plus can allow the use of both Numerical Setpoints and
Named Products. If both numerical setpoints and named
products are enabled the left soft key will be labeled
PRODUCT/SETPOINT (Figure 40).
Figure 40: Left Soft Key Labeled
“PRODUCT/SETPOINT”
Changing the Setpoint - Numerical
Setpoint
If the Temperature Watch display is shown, press any soft key
to return to the Standard Display. From the Standard Display,
press the SETPOINT Key (Setpoint Key
The setpoint display appears (Figure 41).
Figure 41: Setpoint Display
The “-” and “+” Keys are used to increase or decrease the
setpoint until the desired setpoint is shown. In Figure 42 the
setpoint has been changed to 40 F using the “+” Key.
MENU
35
°F
35
PRODUCT/ SENSORS GAUGES
SETPOINT
.8
ON
OFF
ON
OFF
-
EXIT
CURRENT SETPOINT
35 F
+
+/- TO CHANGE