Thermo King Precedent S-600, Operator'S Manual

Page: 120 / 221

Operating Instructions
117
Switching from Diesel to Electric
If the unit is running in Diesel Mode and the Diesel to Electric
Auto-Switch Enabled feature in Guarded Access is set YES
then the unit will automatically switch to Electric Mode
operation when standby power is connected and available. The
screens shown below will not appear.
If the unit is running in Diesel Mode and the Diesel to Electric
Auto-Switch Enabled feature in Guarded Access is set NO, the
unit can be switched to Electric Mode using the Electric
Standby selection from the Main Menu.
From the Standard Display, press the MENU Key (Figure 141).
Figure 141: Menu Key
From the Main Menu choose Electric Standby and press the
SELECT Soft Key (Figure 142).
Figure 142: Select Key
If the unit has standby power available and is turned on, the
electric standby run screen will appear. The new mode is
confirmed for 10 seconds. The unit will start and run in
Electric Mode. If electric standby power is not available or
fails, the display will prompt for a return to Diesel Mode as
shown below.
Any engine related Shutdown Alarms become Log Alarms
when the unit is switched to Electric Mode operation. If the
unit is switched back to Diesel Mode these alarms again
become Shutdown Alarms.
MENU
35
°F
35
SET SENSORS GAUGES
POINT
.8
ON
OFF
ON
OFF
MAIN MENU
DOWN EXIT SELECT UP
HOURMETERS
MODE
ELECTRIC STANDBY
ADJUST BRIGHTNESS