Thermo King Precedent S-600, Operator'S Manual

Page: 112 / 221

Operating Instructions
109
IMPORTANT: If a programmable hourmeter is not enabled
or the view for that hourmeter is not turned on it will not
appear in the display sequence.
Mode
The Mode Menu allows the operator to change the unit
operating modes that have been enabled in Guarded Access.
Only Operating Modes that have been enabled from the
Guarded Access > Main Menu Configuration Menu will be
shown.
• Turns Off Cycle Sentry Mode/Turns On Cycle Sentry
Mode (If Cycle Sentry is turned Off unit runs in
Continuous). Note that selecting Cycle Sentry Mode or
Continuous Mode can also be accomplished using the
Cycle Sentry Key to the right of the display.
• Allows temperature to be displayed in either Fahrenheit or
Celsius degrees (if enabled from the Guarded Access >
Main Menu Configuration Menu).
• Allows the optional Fresh Air Exchange door to be opened
or closed (if enabled from the Guarded Access >
Hardware Configuration Menu).
Total Run
Reminder 2 User Programmable - The number of hours
before a Total Unit Run Time Maintenance
Reminder 2 occurs.
Controller
Power On Total hours the controller and HMI Control
Panel have been turned on.
Pretrip
Reminder User Programmable - number of hours
before a Pretrip Reminder occurs.
Engine
Reminder 1 User Programmable - The number of
hours before an Engine Run Time
Maintenance Reminder 1 occurs.
Engine
Reminder 2 User Programmable - The number of
hours before an Engine Run Time
Maintenance Reminder 2 occurs.
Electric
Reminder 1 User Programmable - The number of
hours before an Electric Run Time
Maintenance Reminder 1 occurs.
Electric
Reminder 2 User Programmable - The number of
hours before an Electric Run Time
Maintenance Reminder 2 occurs.