Thermo King Precedent S-600, Operator'S Manual

Page: 76 / 221

Operating Instructions
73
Selecting Cycle Sentry or
Continuous Mode
When Cycle Sentry Mode is selected the unit will start and stop
automatically to maintain setpoint, keep the engine warm and
the battery charged. When Continuous Mode is selected, the
unit starts automatically and runs continuously to maintain
setpoint and provide constant airflow.
IMPORTANT: Cycle Sentry or Continuous Mode may not be
selectable if OptiSet Plus is in use.
See Figure 73 for an overview of the S electing Cycle Sentry
or Continuous Mode procedure.
If the unit is operating in Cycle Sentry Mode, the Cycle Sentry
Icon will be present in the upper right corner of the display as
shown below. If the Cycle Sentry Icon (Figure 68) is not
present the unit is operating in Continuous Mode.
Figure 68: Cycle Sentry Icon
If allowed by OptiSet Plus, Cycle Sentry Mode or Continuous
Mode is selected by pressing the Cycle Sentry/Continuous Key
as shown in Figure 69.
Figure 69: Cycle Sentry/Continuous Key
ON
OFF
MENU
35
°F
35
SET SENSORS GAUGES
POINT
.8
ON
OFF
MENU
35
°F
35
SET SENSORS GAUGES
POINT
.8