Thermo King Precedent S-600 Operator'S Manual Download Page 208

Page: 208 / 221

Maintenance Inspection Schedule

205

Structural

•

Visually inspect unit for fluid leaks.

•

Visually inspect unit for damaged, loose or broken parts (includes air
ducts and bulkheads).

•

Inspect idlers for bearing wear (noise).

•

Clean entire unit including condenser and evaporator coils and defrost
drains.

•

Check all unit and fuel tank mounting bolts, brackets, lines, hoses, etc.

Pretrip

Every

1,500

Hours

Every

3,000

Hours*

Annual/

4,500

Hours

Inspect/Service These Items

*3,000 hours or two years, whichever occurs first.

Summary of Contents for Precedent S-600





























































































































































































































Search results

Summary of Contents for Precedent S-600

Reviews:

Related manuals for Precedent S-600

Brands by name

Popular brands

Thermo King Precedent S-600, Operator'S Manual

Search results

Summary of Contents for Precedent S-600

Reviews:

Related manuals for Precedent S-600

Brands by name

Popular brands