Thermo King Precedent S-600, Operator'S Manual

Page: 51 / 221

Operating Instructions
48
If a Flash Drive is Connected:
If a properly configured USB Flash Drive is inserted in the
Flash Drive Only USB Port on the Control Panel when the unit
is turned on, the display (Figure 24) will briefly show FLASH
DRIVE.
Figure 24: Flash Drive
Then FLASH DRIVE DETECTED and the Flash Drive Menu
will appear on the display (Figure 25). The display will be
shown for about 30 seconds and then the Standard Display will
appear. To go to the Standard Display immediately press the
EXIT Soft Key.
Figure 25: Flash Drive Menu
IMPORTANT: The engine start is not delayed by the Flash
Drive Menu shown above. The engine start prompt will
appear and the engine will start. After the engine is started
the display will return to the Flash Drive Menu or the
Standard Display.
If a properly configured USB Flash Drive is connected to the
USB Flash Drive connector, this feature allows the operator to
select the desired Flash Drive function. If enabled when the
Flash Drive was configured, the following functions may be
available:
ON
OFF
FLASH DRIVE
FLASH DRIVE DETECTED
LOAD LOAD PLUS
EXIT DOWN FLASH OPTISET
ON
OFF