Thermo King Precedent S-600, Operator'S Manual

Page: 52 / 221

Operating Instructions
49
• DOWNLOAD
• “Download the ServiceWatch Data Logger
• “Download the CargoWatch Data Logger
• FLASHLOAD
• “Flash load Base Controller Software
• “Flash load HMI Control Panel Software
• OPTISET PLUS
• SEND
• “Send OptiSet Plus files
• RETRIEVE
• “Retrieve OptiSet Plus files
The Flash Drive is also available from the Main Menu.
The Flash Drive Menu will time out about 30 seconds after the
engine starts. When the Flash Drive Menu times out, the
Standard Display will appear. To go to the Standard Display
immediately press the EXIT Key.
Configurable Soft Keys
When the Standard Display is shown, the default functions of
the two center soft keys are GAUGES and SENSORS.
(Figure 26)
Figure 26: Soft Keys
The functions of these two keys can be changed as required for
customer convenience. The functions of these two soft keys on
the Standard Display can be re-assigned to any of the following
functions using the Guarded Access > Main Menu
Configuration menu:
Gauges Pretrip SOT (start of trip)
Sensors Data Logger Hourmeters
ON
OFF
MENU
35
°F
35
SET SENSORS GAUGES
POINT
.8