Thermo King Precedent S-600, Operator'S Manual

Page: 59 / 221

Operating Instructions
56
Changing The Setpoint
The Setpoint is changed from the Standard Display. If the
TemperatureWatch display is present, press any key to return to
the Standard Display.
IMPORTANT: If OptiSet Plus is in use there are several
possible options when changing the setpoint.
Numerical Setpoints
If OptiSet Plus is not in use or if only Numerical Setpoints are
enabled the left soft key will be labeled SETPOINT (Figure
38).
Figure 38: Setpoint
Named Products - OptiSet Plus
OptiSet Plus allows the use of Named Products such as
APPLES or BANANAS in place of a numerical setpoint. If
only named products are enabled the left soft key will be
labeled PRODUCT (Figure 39).
• A single setpoint temperature may be allowed for the
specific named product.
• A numerical setpoint range may be allowed for the
specific named product.
Figure 39: Left Soft Key Labeled “Product”
ON
OFF
MENU
35
°F
35
SET SENSORS GAUGES
POINT
.8
MENU
35
°F
35
PRODUCT SENSORS GAUGES
.8
ON
OFF