Wir
Wireless Blood Pr
eless Blood Pressur
essure Sensor
e Sensor
PS-3218
About the pr
About the product
oduct
The Wireless Blood Pressure Sensor is a digital sphygmomanometer
that uses an electronic pressure sensor to measure the mean arterial
pressure. The data collection software uses this measurement to
calculate systolic and diastolic blood pressure, and heart rate. The
blood pressure cuff consists of an inflatable bladder connected by
one hose to a hand pump bulb and by a second hose that attaches to
the pressure sensor box.
Note:
Note: This is not a medical device. It is designed for educational
use only and should not be used in any medical process such as life
support or patient diagnosis. It is not intended for use in graduate
research or industry including industrial control or any type of
industrial testing.
What'
What's Included
s Included
• Wireless Blood Pressure Sensor
• Blood Pressure Cuff, Standard
• USB Cable
Requir
Required Items
ed Items
• Data Collection Software
Data Collection Software
This product requires either SPARKvue or PASCO Capstone for
data collection and analysis.
P
Par
art names and descriptions
t names and descriptions
Blood pr
Blood pressur
essure cuff
e cuff
1
2
3
4
1. Bulb
Bulb
Squeeze the bulb rapidly to add pressure to the cuff.
2. Release Valve
Release Valve
Press the button to release pressure from the cuff. In the center
of the button is a screw that you can use to adjust the pressure
release rate.
3. Luer Connector
Luer Connector
Connects to the luer connector on the sensor.
4. Cuff
Cuff
The cuff wraps around the upper left arm. Align the white index
line on the cuff over the main artery on the inside of the arm.
Sensor
Sensor
XXX- XXX
1
3
4
5
6
7
2
1. Battery Status Light
Battery Status Light
Indicates the battery level and charging status.
LL
IGHT
SS
TATUS
Red, blink
Low battery level
Green, solid
Fully charged
Yellow, solid
Charging
2. Threaded Hole
Threaded Hole
Use for mounting the sensor, such as to a mounting rod. Accepts
1/4-in–20 screws.
3. Luer Connector
Luer Connector
Connects to the luer connector on the blood pressure cuff.
4. Device ID
Device ID
Use to identify the sensor when connecting using Bluetooth.
5. Bluetooth Status Light
Bluetooth Status Light
Indicates the status of the Bluetooth connection.
LL
IGHT
SS
TATUS
Red, blink
Ready to pair
Green, blink
Paired
Yellow, blink
Remotely logging data
6. USB Port
USB Port
Use with the USB cable to connect to a USB wall charger to charge
the battery. Also use to send measurement data to software
when connected to a USB port of a computer or mobile device
(iOS devices not supported).
7. Power Button
Power Button
Press and hold for one second to turn the sensor on or off.
Product Guide
012-15878B
Wireless Blood Pressure Sensor | 1
