Teledyne T3DSO1000, User Manual, Page: 82 / 227

64 User Manual
Figure 28 Slope Trigger
6. Press the Limit Range softkey; then turn the Universal Knob to select the desired
slope condition, and push down the knob to confirm.
●
<= (less than a time value): trigger when the positive or negative slope time of the
input signal is lower than the specified time value.
●
>= (greater than a time value): trigger when the positive or negative slope time of
the input signal is greater than the specified time value.
●
[--,--] (within a range of time value): trigger when the positive or negative slope
time of the input signal is greater than the specified lower limit of time and lower
than the specified upper limit of time.
●
--][-- (outside a range of time value): trigger when the positive or negative slope
time of the input signal is greater than the specified upper limit of time or lower
than the specified lower limit of time.