Teledyne T3DSO1000, User Manual, Page: 7 / 227

VI User Manual
Working Environment
Temperature
Operating: 10
℃
to +40
℃
Non-operation:-20
℃
to +70
℃
Humidity
Under +35
℃
:≤90% relative humidity
+35
℃
to +40
℃
: ≤60% relative humidity
WARNING
To avoid short circuit inside the instrument or electric shock, please do not
operate in a humid environment.
Altitude
Operating: less than 3 Km
Non-operation: less than 15 Km
Degree of protection
IP20
Installation (over voltage) Category
This product is powered by mains conforming to installation (overvoltage) category II.
WARNING
Make sure that no over voltage (such as that caused by thunderbolt) can reach
the product, or else the operator might expose to the danger of electric shock.
Installation (over voltage) Category Definitions
Installation (over voltage) category I refers to signal level which is applicable to equipment
measurement terminals connected to the source circuit. In these terminals, precautions
are done to limit the transient voltage to the corresponding low level.
Installation (over voltage) category II refers to the local power distribution level which is
applicable to equipment connected to the AC line (AC power).