Teledyne T3DSO1000, User Manual, Page: 204 / 227

186 User Manual
Option Management
The T3DSO1000 provides multiple options to fulfil your measurement requirements.
Please contact your
Teledyne Test Tools sales representative or Teledyne Test
Tools technical support to order the corresponding options. You can view the options
currently installed on the oscilloscope or activate the newly purchased option license
codes through this menu.
Do the following steps to install the option on the oscilloscope:
1. Press the Utility button on the front panel to enter the UTILITY function menu.
2. Press the Next Page softkey to go to the third page of the UTILITY function menu.
3. Press the Options softkey to enter the OPTION function menu.
Figure 102 OPTION Function Menu
4. Press the Type softkey; then turn the Universal Knob to select the module to be
installed and push down the knob to confirm.
5. Press the Install softkey to enter the LABEL function menu to input the license.
Figure 103 LABEL Function Menu
●
Turn the Universal Knob to select character
●
Push the Universal Knob to confirm the characters
●
Press the Press To Install when license key input is complete.
●
Press the Clean softkey or the Backspace softkey to delete an incorrect
character.
6. Press the Information softkey to view the option information.