Teledyne T3DSO1000, User Manual, Page: 105 / 227

User Manual 87
Figure 40 I2C TRIGGER Menu
5. Press the Condition softkey and turn the Universal Knob to select the trigger
condition:
●
If you select the EEPROM condition:
a. Press the Limit Range softkey to set the qualifier ( = , < or > ).
b. Press Data1 softkey and set its value by turning the Universal Knob.
●
If you select 7 Addr & Data or 10 Addr & Data condition:
a. Press the Addr softkey and turn the Universal Knob to select the 7- bit or 10-
bit device address.
b. Press the Data1 or Data2 softkey and set the value of them.
c. Press The R/W bit softkey and select write-frame or read-frame to trigger the
oscilloscope.
( Tips : If device address is 7-bit, the value of the address is in the range of 0x00 to
0x7 F. If the device address is 10-bit, the value of the address is in the range of
0x00 to 0x3FF.)
●
To select the Data Length condition:
a. Press Address to set the SDA address length to 7 bit or 10 bit.
b. Press Byte Length softkey and set the byte length using the Universal
Knob. The range of the Byte Length is 1 to 12.