Teledyne T3DSO1000, User Manual, Page: 124 / 227

106 User Manual
significant bits can be changed.)
●
If you select the ID+DATA condition:
a. Press ID bits softkey to select the ID’s length (11 or 29 bits).
b. Press Curr ID Byte softkey and use Universal Knob to select the byte that
you want to modify.
c. Press the ID softkey and set the ID’s value using the Universal Knob.
d. Press Data1 softkey and set the value of the first byte using the Universal
Knob.
e. Press Data2 softkey and set the value of the second byte using the Universal
Knob.
See figure 56, the trigger condition is ID, ID’s value is 0x013, Baud rate is 100kb/s:
Figure 53 CAN Trigger