Teledyne T3DSO1000, User Manual, Page: 189 / 227

User Manual 171
3. How to setup an Arb waveform
Press the Utility
→
Next Page4/4
→
AWG
→
Wave then select the Arb, and it has two
types:
Stored Arb
：
Users can edit the Arb through a PC. Download the edited Arb to the instrument through the
remote interface, or read from the U disk which has stored the Arb. Choose Wave Type→
Arb→ Arb Type→ Stored, enter the Stored Arb interface and invoke the waveform in the
external storage device.
Built_in Arb
：
Choose Wave Type→ Arb →Arb Type→ Built-in to enter the following interface,
Rotate the knob to move the cursor, press the knob to select to the desired waveform, and
then return back to the Built-in waveform interface.
Figure 91 Built_in Arb interface
Se�ng
Figure 92
AWG Setting Interface
1. Output Load
Press Utility →NextPage4/4→ AWG → Setting → Output Load to set High-Z or 50Ω .