manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 308 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 308

Teledyne LeCroy

Packet View Toolbar

306

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

The 

Wrap

 

Packets

 

button on the Viewer Toolbar wraps the packet data in the 

display to eliminate the need for horizontal scrolling.

Go to CATC Navigation View. Click this button to change the trace display to a 
CATC Trace™. 
You can change the colors, fonts, and so on, in the Trace Viewer Configuration 
(see 

“Trace Viewer Configuration” on page 318

).

The 

Show/Hide

 

Link

 

Packet

 

button displays/hides the Link layer (SAS only). 

The 

Show/Hide

 

Transport

 

Packet

 

button on the Layers Toolbar displays/hides 

the Transport layer and below (SAS only). 

The 

Show/Hide

 

All

 

Commands

 

Packet

 

button shows/hides the 

Command layer and all layers below: SCSI Cmd and Task Mng, SMP 
Cmd, and ATA Cmd (SAS only).

Click the down arrow on the Show/Hide All Commands Packet 
button to choose command types to show/hide.

The 

Show/Hide

 

Physical

 

Packet

 

button toggles the display of physical layer 

packets (SATA only).

The

 

Show/Hide

 

FIS

 

packet

 

button toggles the display of FIS layer packets. 

When “OFF”, the FIS layer and its links are hidden (SATA only).

The 

Show/Hide

 

CMD

 

packet

 

button toggles the display of the CMD packets. 

When “ON”, only the command layer displays (SATA only).

The

 

Show/Hide

 

Command

 

Queue

 

(CQ) button displays queued commands. 

SATA only. 
The CQ button’s hierarchy only applies to 

ReadDMAQueued

 and 

WriteDMAQueued

. The hierarchy for other queued commands is displayed 

as part of the regular application layer decoding.

The

 

Order/Reorder

 

toggles the time order of packets. SATA only.

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments