manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 243 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 243

 

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

241

Analysis

 Teledyne LeCroy

Double clicking in the Identify Device Frame (while in Text Mode) will pop up the Data 
Payload View. See 

Figure 3.29 on page 241

.

Figure 3.29: Data Payload View from Identify Device Frame in Text Mode

3.3.8

Frame Inspector View

Frame Inspector View has lots of information that is available in Packet View, but not 
Spreadsheet View, so it is most useful in conjunction with the Spreadsheet View.
This view has the following three tabs:

Spec

 

View:

 

This view shows the Frame as it would appear in the spec, with the field names and values 
spelled out clearly. Fields that are too short to clearly contain the description can be 
viewed as tooltips by hovering the mouse over them. Some fields might have a a 
lowercase ‘e’ button at the top right corner. Pressing this button displays an ‘expanded’ 
view of the sub

‐

fields in this field.

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments