Teledyne Sierra M6-2, User Manual, Page: 122 / 538

Teledyne LeCroy Advanced Mode (User ‐ Defined)
120 Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual
Figure 2.109: SAS: Choosing a Trigger Condition
2. Define each selected pattern in the same way as in Easy Mode, as described starting
on page 69 . To use a timer, define it first.
Note:
You can set a timer for any If or Else If condition.
3. Enter a value for the number of occurrences before trigger in the Cont field, up to a
maximum of 65535 occurrences.
4. Choose a capture option: Everything, Nothing, or Pattern .
5. If you choose Pattern, you can select patterns for inclusion or exclusion. Clicking the
Pattern option enables a pattern definition dialog (see Figure 2.110 on page 120 ).
Figure 2.110: SAS: Choosing a Pattern
6. Choose pattern(s) and click the +>> button to add them for capture or exclusion. You
define each pattern the same way as in Easy mode (see “Defining Patterns” on
page 69 ).
7. For an output trigger, click the down arrow in the Ext. Out field and choose an
output trigger level. Note: Do not use the LOW setting in Advanced Mode.
8. To go to another state, click the down arrow in the Go To field and select a state. If
no other state has been defined, choose New State to add a state.