manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 330 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 330

Teledyne LeCroy

Preferences

328

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

3.18.2 Trace Viewer Tab

Figure 3.142: Preferences Dialog Trace Viewer Tab

The SATA Preferences dialog has the same options.

Open Trace file In

Default

 

Workspace

: The software opens a 

trace

 file in view(s) based on the specified 

default workspace.

As

 

previously

 

saved

: The software opens a 

trace

 file in view (views) based on the last 

saved configuration for the 

trace

 file. 

Optimization

Sampling

 

memory

 

usage

 

optimization

: Enables memory cascading for two ports. The 

analyzer will use memory of another port if there is not data on another port. (see 

“Sampling Memory Usage Optimization” on page 334

)

Quick

 

View

: Quick View allows full access to the whole trace more quickly, especially 

when using a Gigabit Ethernet connection. However, the trace is NOT written to the host 
machine’s hard drive. To save the trace, you must manually click 

Save

.

If you do not check Quick View, the trace loads more slowly but is automatically saved to 
the host machine’s hard drive.

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments