manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 44 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 44

Teledyne LeCroy

Teledyne LeCroy SAS/SATA Protocol Suite Menu Options and Toolbars

42

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

Set Port Alias (see 

“Set Port Alias” on page 322

)

Set SAS Address Alias (see 

“SAS Address Alias (SAS only)” on page 323

)

Figure 1.22: Setup Menu Option

1.21.3 Session

The Session menu has the following options:

Start Capture/Record 

‐

 Start capture or record a trace

Pause Capture/Record 

‐

 Aborts the capture without saving

Stop Capture/Record 

‐

 Stops the hardware

Start Target Emulator 

‐

 Starts the target emulator (SAS)

Stop Target Emulator 

‐

 Stops the target emulator (SAS)

Start Device Emulator 

‐

 Starts the device emulator (SATA)

Stop Device Emulator 

‐

 Stops the device emulator (SATA)

1.21.4 Analysis

The Analysis menu (see 

Figure 1.23 on page 43

) allows you to view captured data (see the 

following screen capture).

Menu items and toolbar options are enabled or disabled and displayed or hidden based 
on the type of window open. The following types of windows can be displayed:

No active window

Project file open

Trace file open

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments