manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 46 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 46

Teledyne LeCroy

Teledyne LeCroy SAS/SATA Protocol Suite Menu Options and Toolbars

44

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

cation script over the trace

Power

 

Tracker

 

View

: Displays power statistics

1.21.6 Navigation

The Navigation menu has the following options to navigate through the application (see 
the following screen capture).

Figure 1.24: Navigation Menu Option

Goto

Trigger Position

X Position

Y Position

Packet No

Time Stamp

Bookmark

Begin 

End 

Search

Search Next

Search Previous

1.21.7 View

The View menu options allows the user to zoom in and out, enable/disable filtering and 
toolbars among other actions. It has the following options (see 

Figure 1.25 on page 45

).

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments