manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 373 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 373

 

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

371

Interface

 Teledyne LeCroy

Tools

Browse UserData, System, or InFusion folder.

Help

Help Topics and About InFusion.

4.2.3

Main Library

You can 

Show

 

Main

 

Library

.

Figure 4.2: Main Library.

The Main Library has Scenarios.

Using the buttons from left to right, you can:

Create a new scenario and save a scenario.

Save a library and save a copy of a library.

View/edit a scenario, insert copy of a scenario and delete scenario.

Copy and paste.

4.2.4

File Library

You can display the File Library.

Figure 4.3: File Library.

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments