manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 233 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 233

 

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

231

Analysis

 Teledyne LeCroy

Copying Packets from a Trace to a Host Emulator Script

This check mark in the illustration below shows packet (s) selected to copy. You can copy 
packet(s) from a trace and paste it into a host emulator script. That is why you can only 
mark packets that we support in emulator and host side packets. You can also mark 
multiple packets by left

‐

clicking and moving the mouse over multiple packets and then 

right

‐

click to select them, and paste them in an emulator script.

Figure 3.11: Packets Selected to Copy.

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments