manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 271 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 271

 

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

269

Analysis

 Teledyne LeCroy

3.3.16 Data Report

When a captured sample is in the Sample Viewer, the Data Report button is on the 
Viewer toolbar, and Data Report is in the Report menu.

The data report displays all the data sent from the host to the device and from the device 
to the host. All PIO In =>In commands are grouped as a data packet until the occurrence 
of a PIO Out =>Out command, creating a new data packet.

To display a Data Report,

 

click the 

 

Data

 

Report

 button on the Viewer toolbar or 

select 

Report

 

>

 

Data

 

Report

.

Figure 3.78: SAS: Data Report

Click the 

Down

 

Arrow

 in a data field to display Data Report details (see the following 

screen capture.)

Figure 3.79: SAS: Data Report Details

Click the 

Statistics

 button 

at the end of a row to display data report 

statistics.

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments