Teledyne Sierra M6-2, User Manual, Page: 106 / 538

Teledyne LeCroy Projects
104 Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual
Defining Patterns
The definition of patterns for the sequential trigger mode is identical to the Any Trigger
mode, with the following exception:
In sequential triggering mode, the definition dialogs for the triggering patterns enable
the setting to count the number of occurrences. This allows you to specify the number of
times that the pattern must occur before triggering or proceeding in the trigger
sequence.
Figure 2.93: Number of Occurrences DIalog
Note:
The events on each link are counted independently, causing a trigger whenever the number of
occurrences on any link equals the specified value.
Triggering Order
As you define and add triggering patterns, they display under the Trigger category in the
Project Tree sequentially, in the order in which you entered them. When the project runs,
the analyzer detects the occurrence of each pattern in order and triggers on the last one.
You can re ‐ order the sequence of triggering patterns. To change the sequence order,
highlight a trigger pattern and use the Up or Down arrow to move it to a new position.
Figure 2.94: Triggering Order