Teledyne Sierra M6-2, User Manual, Page: 492 / 538

Teledyne LeCroy Sierra Trainer Generation Commands
490 Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual
AutoMode Settings
AutoOOBMode On When set, the generator will go through the stages of
bringing up the link automatically, including waiting
for and responding to the device or host it is
connected to.
AutoHoldMode 0 When set, the generator will respond automatically
to Hold requests. Not supported for version 1.1
(reserved).
AutoDMAT 0 When set, the generator will respond automatically
to DMAT requests. Not supported for version 1.1
(reserved).
AutoSpeedNeg On When set, the generator will automatically go
throughthe speed negotiation process, for the speed
set in the PINTERFACEC_SERDES register for the
Trainer.
AutoAlignSATA 0 When set, the generator will automatically inserting
the stream 2 Align(0) primitives every 254
DWORD
s, as
specified in the SATA spec.
AutoAlignSAS On When set, the generator will automatically inserting
the stream Align primitives every 2048
DWORD
s, as
specified in the SAS spec.Two Align modes can be
turned on simultaneously, to support STP
Setting
Default
Value Description