Teledyne Sierra M6-2, User Manual, Page: 251 / 538

Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual 249
Analysis Teledyne LeCroy
Figure 3.40: Primitive Report
Bus Condition Report
To display the Bus Condition Report (see Figure 3.41 on page 249 ), click the Bus Condition
tab. The Bus Condition Report displays information in the following columns.

Bus Condition: All, Custom, Activity On, COMININT/COMRESET, COMSAS, COM ‐
WAKE, Keep Alive Activity

Direction: All, H ‐ >D, D ‐ >H, I ‐ >T, T ‐ >I, or Custom

Count : All, Custom, or a number of occurrences

% : of total count
Figure 3.41: Bus Condition Report
ATA Command Report
To display the ATA Command Report, click the ATA Command tab (see Figure 3.42 on
page 250 .) The ATA Command Report displays information in the following columns:

Command: All, Custom, Check Power Mode, Execute Device Diagnostic,
Flush Cache, Identify Device, Read DMA Ext, Read FPDMA Queue, Set Feature,
Write DMA Ext, Write FPDMA Queue

PM Port

Direction: All, H ‐ >D, D ‐ >H, I ‐ >T, T ‐ >I, or Custom

Number of FIS: All, Custom, or a number

Payload Size : All, Custom, or a number of DWORDs