manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 469 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 469

 

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

467

Trainer Script Enhancements

 Teledyne LeCroy

SATA

 

Host

As a Host, Trainer can send commands and complete them in normal or some popular 
error conditions. SATA Host can issue NCQ commands, necessary for SATA compliance 
tests on SSD devices. Limitations are:

Does not save Read data or reuse bulk read data for next commands.

Sends only limited Write data patterns.

SATA

 

Device

As a Device, Trainer can receive commands and respond to them in normal or some 
popular error conditions. Limitations are:

Uses only one command at a time. Command queuing is not supported.

Does not save incoming write data. Sends back data for all LBAs or generates 
counter/random data. Cannot be used as a real formatted partition. To use the 
Trainer as a SATA Device in real configurations, only tools like IO

‐

METER (that can 

work with un

‐

partitioned and un

‐

formatted drives) can be used. 

5.13.1 Variable Definition

Variable definition is like definitions in programming languages. You can define up to 512 
DWORD (32

‐

bit) variables. There is no constraint on variable names, except you cannot 

use keywords. Variable scopes are general and you should define them in the script 
header before the generation block.

The syntax of variable definition is:

VAR32 

@VariableName1, @VariableName2, ...

VAR64 

@VariableName

VAR64 holds field values greater than 32 bits, such as SASAddress. 

Note:

Variable names should start with @.

5.13.2 Assigning Variable Values

You can set variable values in different ways:

Constant

 

value:

 

@varName1 = 1234

Other

 

variable

 

value

: 

@varName1 = @varName2

Result

 

of

 

expression

 

on

 

other

 

variables

:

@varName1 = @va @varName2

Fields

 

of

 

last

 

received

 

frame

: 

@varName1 = (SSPFrame)LRF::Frame-

Type,

where LRF is Last Received Frame

Note:

Specifying packet type (SSPFrame) before LRF causes last received frame to be this packet type, 

and field start

‐

bit position is calculated according to the packet

‐

type definition.

Part

 

of

 

last

 

received

 

frame

: 

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments