manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 290 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 290

Teledyne LeCroy

Navi View Toolbar

288

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

3.8.3

Filter Setup

To display the Filter setup dialog, click the 

 

Filter

 button on the Viewer toolbar or 

select 

View

 

>

 

Filtering

.

Figure 3.98: SAS/SATA: Filter Setup Dialog

You can select or deselect each of the items shown in the Filter Options window for 
filtering, by checking or unchecking a corresponding check box. Items not in the current 
sample are in shade. See 

“Selectable Filter Options for SAS” on page 291

 and 

“Selectable 

Filter Options for SATA” on page 296

.

Note:

If you select a group, that also selects all child items. 

Note:

Only packets captured at run time are available for selection for filtering.

Filter Type

You can choose to show or hide the Filter Type items by checking the 

Show

 or 

Hide

 

option button.

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments