manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 277 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 277

 

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

275

SAS Verification (SAS)

 Teledyne LeCroy

Figure 3.84: Run Verification Scripts Dialog

Speed Negotiation has Speed Negotiation Window Three and Train Speed Negotiation 
Window.

The Link Layer has Link Reset, Connections, SSP Frames,
Closing SSP Connections, Connections through Expanders, and Break.

The Transport Layer has SSP Frames Structures, Command IU, Data IU,
XFER_RDY IU, Response IU, and Error Handling.

The Application Layer has SCSI CDB, STP and NACA Operations.

2. Choose the tests in the left pane of the dialog and click the 

Add>>

 button.

3. Enter a value for 

DUT

 

Type

: Target, Initiator, or Expander.

4. Enter the 

DUT

 

Name

.

5. Enter a value for the 

Number

 

of

 

Runs

 to run a particular test more than once.

6. Enter the 

Connection

 

Rate

 as Autospeed or a value. 

7. To view failed test traces in the trace viewer, check the 

Automatically load failed test traces

 

into

 

Sierra

 

trace

 

viewer

 check box.

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments