Teledyne Sierra M6-2, User Manual, Page: 294 / 538

Teledyne LeCroy Navi View Toolbar
292 Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual

STP Frames

SCSI Commands

SMP Commands

Task Management Functions

ATA Commands

SCSI Command Status (see “Filter Check Condition” on page 292 ).

Source SAS Address

Destination SAS Address

Pair SAS Address

Protocol Error

STP Port

Tag (see “Filter by Tag Number” on page 294 ).

ATAPI SCSI Command

Device Sleep

Miscellaneous (see “Filter Miscellaneous” on page 295 ).

Training Sequence
Command Data Pattern
When selected, depending on the Filter Type, the Hide/Show selection shows or hides
captured Command Data Patterns in the Sample Viewer.
Bus Condition
When selected, depending on the Filter Type, the Hide/Show selection shows or hides
captured Bus Conditions in the Sample Viewer.
Incomplete Frames
When selected, depending on the Filter Type, the Hide/Show selection shows or hides
Incomplete Frames in the Sample Viewer.
ATA Command
When selected, depending on the Filter Type, the Hide/Show selection shows or hides
captured ATA commands in the Sample Viewer.
Protocol Error
When selected, depending on the Filter Type, the Hide/Show selection shows or hides
captured packets with the specified Protocol Errors in the Sample Viewer.
ATAPI SCSI Command
When selected, depending on the Filter Type, the Show/Hide selection shows or hides
ATAPI SCSI commands.
Filter Check Condition
Checking the SCSI Command Status check box enables Check Condition for filtering (see
Figure 3.102 on page 293 ).