manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 32 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 32

Teledyne LeCroy

Expandability

30

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

Figure 1.16: Select Adapter Dialog

Refresh

 

Device

 

List

 

Click 

Refresh

 

Device

 

List

 

to refresh the device list.

To connect to a device, select a device which is Ready to Connect and click the 

Connect

 

button on the right.

 

The Connection Properties dialog is displayed (see the following 

screen capture).

Figure 1.17: Connection Properties Dialog 

Specify one of the actions from the following: 

Automatically connect to the device 

Ask if I want to connect to the device 

Take no action

If ‘Automatically connect to the device’ is selected, the next time the application opens 
the device will be automatically connected. 

In the 

Select

 

Device

 

dialog chained or cascaded units are displayed in the 

Device

 

column 

with a 

[

 (square bracket) icon. The sequence of the units is displayed in the 

Order

 

column. See the following screen capture. 

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments