manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 476 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 476

Teledyne LeCroy

Sierra Trainer Generation Commands

474

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

Set Speed = LINK_SPEED_1_5G

Generator will change speed to 1.5G (if 
MultiSpeed is enabled)

. 

This settings is not applied 

when 

Advanced Connect is set.

Set Speed = LINK_SPEED_3G

Generator will change speed to 3G (if 
MultiSpeed is enabled).

This settings is not applied 

when 

Advanced Connect is set.

Set Speed = LINK_SPEED_6G

Generator will change speed to 6G (if 
MultiSpeed is enabled).

This settings is not applied 

when 

Advanced Connect is set.

DevSlp

Makes the device sleep signal high. Trainer 
doesn’t go to Electric idle mode 
automatically after Devslp command. We 
can force trainer to go to DC Idle mode 
using the “disconnect “ command after 
Devslp command. This command works 
when Generation mode is 
GEN_MODE_SAS_INITIATOR or 
GEN_MODE_SATA_HOST

Exit_DevSlp

Makes Device sleep signal low (comes out 
of device sleep mode). This command 
works when Generation mode is 
GEN_MODE_SAS_INITIATOR or 
GEN_MODE_SATA_HOST

Send_Phy_Capability

Generator will send PHY Capability Bits.
(this command is used in SNW3).

Send_Train_TrainDone

Generator will send Train/Train Done 
Patterns.
(This Command is used in Train Windows).

Delay (#)

Generator will wait until # ns before 
executing next command.

Power_Expansion_On
Power_Expansion_Off

Switch on power expansion card.
Switch off power expansion card

Exit (

ExitCode

)

Call this command in any branch of the 
Trainer program to stop execution. After 
exit, the Port Status dialog displays the exit 
code.

Note

: The Trainer GUI has LED indicators:

Green is for pass.
Red is for fail.
No color is for unknown or for user to 

review.

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments