manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 324 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 324

Teledyne LeCroy

Set Port Alias

322

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

Time Stamp Format

Select Teledyne LeCroy, Milliseconds, or Microseconds.

Font

To change display fonts, click the 

Font

 

button to open the Font dialog box.

Figure 3.136: Font

Choose the font, font style, and size, and click 

OK.

Save/Load Settings

You can save the customized configuration settings in a 

*.cfg

 file by clicking the 

Save

 

button and completing the Save As procedure. To load a previously saved configuration 
file, click 

Load

 and choose an appropriate file.

3.15  Set Port Alias

Port Alias allows you to assign a meaningful name to each port to assist in interpreting 
the results displayed in the sample view (see 

Figure 3.137 on page 323

).

To assign port names in an open sample view, select 

Setup > Set Port Alias

.

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments