manualshive.com logo in svg

Teledyne Sierra M6-2, User Manual, Page: 145 / 538

Share
Download
Teledyne Sierra M6-2 User Manual Download Page 145

 

Sierra M6

‐

2 SAS/SATA Protocol Analyzer User Manual

143

Emulation

 Teledyne LeCroy

Choosing 

Find

 

New

 

Device

 opens the Device Identifier dialog.

Figure 2.149: SAS: Device Identifier Dialog 

SAS

 

vs.

 

SATA

: SATA Dialog does not show Find section (All Info and SAS Address).

SATA Dialog has devices D1 to D2 and does not show T1 to T2.
SATA Dialog does not show Supported Pages and Subpages.
SATA dialog lists Word, Description and Value, not Offset, Field, Length, and Value.
SATA dialog lists Device Type, Serial Number, and Spec Version, not Protocol Supported 
(SSP, SMP, STP)

2. Click the 

Find

 

DUT

 

button to display all active addresses (see 

Figure 2.150 on 

page 144

).

Summary of Contents for Sierra M6-2



























































































































































































































































































































































































































































































































































Reviews:

No comments