Teledyne Sierra M6-2, User Manual, Page: 320 / 538

Teledyne LeCroy Display Configuration
318 Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual
Figure 3.132: Cursor Position Toolbar
3.14 Display Configuration
The Analyzer ships with a default display configuration of field and viewer settings. You
can define your own field and viewer settings for a particular testing scenario. Right
‐ click
in the Packet View and select Preferences or select Setup>Preferences>Trace
Viewer>Configuration . The Trace Viewer Configuration dialog displays (see Figure 3.133
on page 319 ).
3.14.1 Trace Viewer Configuration
The Trace Viewer Configuration dialog (see Figure 3.133 on page 319 ) allows you to
change the following display settings:

Field Setting

Format (Decimal, Hexadecimal, Binary)

Visible

Byte Order (Right Align, Left Align)

Field Header Setting

Text (color)

Name

Abbreviation

Foreground (color)

Viewer Setting

Wrap Packet

Enable Tooltips

Data Payload

Columns in Row (1, 2, 4, 8, 16)

Bytes in Column (1, 2, 4, 8, 16)

Time Stamp Origin: Absolute, Trigger, User Defined, Based on System Time

Same color for start time and port

Enable Packet View Condense Mode

Time Stamp Format (LeCroy, Milli, Micro)

Save Trace Viewer Configuration in a file

Load Sample Viewer Configuration from a file

Factory Setting (restores default settings)

Font (opens Font dialog)