Tektronix RSA3408B, Service Manual

Page: 133 / 250

Maintenance
RSA3408B Analyzer Service Manual
5- 5
Inspection — Exterior. Inspect the outside of the analyzer for damage, wear, and
missing parts, using Table 5--2 as a guide. Analyzers that appear to have been
dropped or otherwise abused should be checked thoroughly to verify correct
operation and performance. Immediately repair defects that could cause personal
injury or lead to further damage to the analyzer.
Table 5- 2: External inspection check list
Item Inspect for Repair action
Cabinet, front panel,
and cover
Cracks, scratches, deformations,
damaged hardware or gaskets.
Repair or replace defective
module.
Front-panel knobs Missing, damaged, or loose
knobs.
Repair or replace missing or
defective knobs.
Connectors Broken shells, cracked insulation,
and deformed contacts. Dirt in
connectors.
Repair or replace defective
modules. Clear or wash out dirt.
Carrying handle, bail,
cabinet feet
Correct operation. Repair or replace defective
module.
Accessories Missing items or parts of items,
bent pins, broken or frayed
cables, and damaged connec-
tors.
Repair or replace damaged or
missing items, frayed cables, and
defective modules.
Cleaning Procedure — Exterior.
To clean the analyzer exterior, do the following
steps:
1. Remove loose dust on the outside of the analyzer with a lint free cloth.
2. Remove remaining dirt with a lint free cloth dampened in a general purpose
detergent-and-water solution. Do not use abrasive cleaners.
3. Clean the light filter protecting the monitor screen with a lint-free cloth
dampened with either isopropyl alcohol or, preferably, a gentle, general
purpose detergent-and-water solution.
CAUTION.
To prevent getting moisture inside the analyzer during external
cleaning, use only enough liquid to dampen the cloth or applicator.