Tektronix RSA3408B, Service Manual

Page: 17 / 250

RSA3408B Analyzer Service Manual
xiii
Introduction
This manual contains information needed to properly service the RSA3408B
8 GHz Real-Time Spectrum Analyzer as well as general information critical to
safe and effective servicing.
To prevent personal injury or damage to the analyzer, consider the following
before attempting service:
H
The procedures in this manual should be performed only by a qualified
service person.
H
Read the General Safety Summary and the Service Safety Summary,
beginning on page vii.
H
Read the RSA3408B User Manual (Tektronix part number 071-2364-xx) for
operating information.
When using this manual for servicing, be sure to follow all warnings, cautions,
and notes.
Performance Check Interval
Generally, the performance check described in section 3, Performance Verifica-
tion , should be done every 12 months. In addition, performance check is
recommended after module replacement.
If the analyzer does not meet performance criteria, repair is necessary.
Strategy for Servicing
Throughout this manual, the term “module” refers to any field-replaceable
component, assembly, or part of the analyzer.
This manual contains all the information needed for periodic maintenance of the
analyzer. (Examples of such information are procedures for checking perfor-
mance.)
Further, it contains all information for corrective maintenance down to the
module level. To isolate a failure to a module, use the fault isolation procedures
found in Troubleshooting , part of section 5, Maintenance . To remove and replace
any failed module, follow the instructions in Removal and Installation Proce-
dures , also part of section 5. After isolating a faulty module, replace it with a
fully-tested module obtained from the factory. Section 7,
Replaceable Parts List,
contains part number and ordering information for all replaceable modules.