Tektronix RSA3408B, Service Manual

Page: 68 / 250

Performance Tests
3- 36
RSA3408B Analyzer Service Manual
Equipment
Required
One signal generator (Item 1)
One spectrum analyzer (Item 5)
One power meter (Item 7)
One power sensor (Item 8)
One 50
Ω
N-N coaxial cable (Item 11)
Prerequisites Refer to page 3--10.
1.
Set up the power meter and sensor:
Do step 1 on page 3--28 to set up the power meter and sensor.
2. Set the signal generator output:
a. Hook up the instruments:
Connect the signal generator (Item 1) output through a 50
Ω
N-N coaxial
cable to the power sensor input. See the figure below.
Output
Signal generator
Power meter
Power sensor
b.
Set the signal generator controls:
Frequency 100 MHz . . . . . . . . . . . . . . . .
Level +10 dBm . . . . . . . . . . . . . . . . . . . .
c.
Set the power meter control:
Frequency 100 MHz . . . . . . . . . . . . . . . .
Check Level Linearity