Tektronix RSA3408B, Service Manual

Page: 167 / 250

Removal and Installation Procedures
RSA3408B Analyzer Service Manual
5- 39
Back bracket
Front bracket
Edging
(63 mm L)
Edging
(57 mm L)
Figure 5- 20: Outside HDD bracket assembly removal
8.
Remove the disk unit: See Figure 5--21.
a. Remove the board stopper bracket and the memory support bracket, if
not yet. Refer to step 3 on page 5--31.
b.
Remove the two screws securing the disk bracket to the shield bracket.
c.
Remove the two screws securing the disk bracket to the main chassis.
d. Lift up the disk bracket containing the floppy disk drive.
9. Remove the floppy disk drive: See Figure 5--21.
Refer to Floppy Disk Drive on page 5--35 for the procedure.
10.
Remove the A62 Front connection board: See Figure 5--21.
Refer to A62 Front Connection Board on page 5--35 for the procedure.
11. Reinstallation:
Reverse steps 4 through 10 to reinstall the removable hard drive.