Tektronix Keithley 2281 Series, Reference Manual

Page: 277 / 578

Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual Section 7: SCPI command reference
077114601 / March 2019 7-13
:CONFigure[n]:<function>
This command configures the instrument to a specific setup for measurements.
Type Affected by Where saved Default value
Command only Recall settings
Instrument reset
Power cycle Save settings See Details
Usage
:CONFigure[n]:<function>
:CONFigure[n]:<function> <range>
:CONFigure[n]:<function> <range>,<resolution>
[n]
Channel number: For single-channel instruments, the value is 1
<function>
The measurement function to which this setting applies:

Concurrent: CONCurrent[:DC]

Current: CURRent[:DC]

Voltage: VOLTage[:DC]
<range>
The range value.
Current range and concurrent range:

10 mA range: 0.01

100 mA range: 0.1

1 A range: 1

10 A range: 10
Voltage range: 20 V
<resolution>

4.5 digit resolution:
4

5.5 digit resolution:
5

6.5 digit resolution:
6
Details
This command specifies which range and resolution are used for the selected measurement function.
If you send only the command without any parameters, the present setting values for range and for
the selected measurement function are used.
Example
:CONF:CURR 0.01,5
Set the source current to the 10 mA range and the
resolution to 5.5 digits.
Also see
:SENSe[n]:<function>:RANGe (on page 7-121)
:SENSe[n]:<function>:RESolution (on page 7-126)