Section 2: General operation
Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
2-52
077114601 / March 2019
To adjust the brightness using the SCPI remote interface:
Send the following command:
:DISPlay:BRIGhtness <brightness>
Where
<brightness>
is from
1
to
100
. For example, 75 represents 75 percent brightness and 100
represents full brightness.
Installing the system
This section contains information on how to install your 2281S power supply.
Bumpers
The 2281S has front and rear bumpers for using the instrument on a benchtop.
Removing bumpers
You can remove the bumpers on the 2281S if you want to mount the instrument in a rack.
If you remove the bumpers, be sure to store them for future benchtop use.
To remove the bumpers:
1. Grasp the front bumper on each side of the 2281S and gently pull it toward you until the bumper
comes off of the instrument.
Figure 28: Removing the front bumper
